How to Choose a Spray Booth Filter Supplier in Australia: 7 Questions to Ask Before You Order
Choosing a spray booth filter supplier in Australia? Ask these 7 questions on local stock, delivery, custom sizes, genuine brands and spec sheets.
Choosing a spray booth filter supplier in Australia? Ask these 7 questions on local stock, delivery, custom sizes, genuine brands and spec sheets.
Andreae Standard or High Efficiency? Compare paint holding, efficiency, roll sizes and cost per kilo of overspray held to pick the right booth filter.
Cut G4 filter media right the first time. Measure, add overlap, find the airflow side, fit without gaps and see how many panels a 20 m roll gives.
Smells coming through the air con? Learn what an activated carbon HVAC filter removes, what it doesn’t, where it sits and when to replace it.
A pocket filter unfolds to roughly ten times the media area of a flat panel in the same housing. Here is what that buys you in service life, fan energy and running cost.
Roll media wins on cost per square metre and odd sizes. Pre cut filters win on labour, frames and documentation. Here is how to work out which one your site actually needs.
A filter sold as 20x20x1 is not actually 20 inches. Here is how to measure your housing properly, why a loose filter lets air bypass the media, and what to send a supplier.
A G4 filter captures around 90 percent of dust by weight. Learn what that means, how G4 compares to MERV and ISO ePM10, and how to specify one in Australia.
Dust nibs, fish eyes, orange peel or solvent pop? Use this diagnostic guide to trace common paint defects back to the filter position causing them, and know what to check first.
Crossdraft, downdraft or semi downdraft? Learn which filter combination each spray booth type needs, position by position, and how to spec a full set from AeroFlow Filters.