Inlet Filters and Pre-Filters for Spray Booths: Your First Line of Defence
Inlet filters and pre filters stop dust before it reaches your spray zone. Learn why they matter, the types available, and how AeroFlow Filters sizes them to fit.
How to Choose the Right Pre-Filter (Inlet Filter) for Your Spray Booth
Panel or concertina? Exact sizing? Replacement intervals? This buying guide walks you through choosing the right pre filter for your spray booth.
From Binks to Andreae: The History and Evolution of Concertina Paper Filters
Searching for Binks filters? The concertina paper filter you trust is now known as Andreae. Learn the story and find your replacement at AeroFlow Filters.
Complete Spray Booth Filtration System Guide: From Inlet to Exhaust
Follow the air through your spray booth from inlet to exhaust. Every filter stage, media type, and replacement indicator explained in one complete guide.
What Are Concertina Paper Filters? Andreae Filters Explained
A plain English introduction to concertina paper filters and the Andreae brand, including how the pleated design works and where it is used in spray booths. Supplied locally by AeroFlow Filters.
Paint Pocket Exhaust Filters: What They Are and How to Get the Best Performance
Learn what Paint Pocket pocket style exhaust filters are, where they perform best, and how they compare to flat fibreglass media. Fast local supply from AeroFlow Filters.
Fibreglass vs Synthetic Media: Which Spray Booth Filter Is Right for Your Application?
An honest comparison of fibreglass and synthetic filter media for spray booths, covering efficiency, capacity, cost, and the right choice by filter position. Expert advice from AeroFlow Filters.
Andreae Filters vs Generic Alternatives: What’s the Difference in Performance?
See how genuine Andreae concertina filters compare to generic alternatives on quality, filter life, and finish protection, plus the total cost of ownership case.
Ecoguard Exhaust Filters: Performance and Application Guide
Every clogged filter steals airflow. That’s just a fact. When you run a high-volume workshop or an industrial coating line, you know exactly what happens next. The extraction system struggles. Overspray lingers in the air instead of being pulled into the exhaust bank. Before you know it, that floating clear-coat settles right back onto a…
Floor Filters for Spray Booths: Why the Right Media Protects Your Booth and Your Finish
You’ve just laid down the final clear coat. The panel looks like glass. You turn around to clean your gun, look back, and there it is: dust. The finish is compromised. Now you’re looking at hours of sanding, buffing, and repainting. It’s the most frustrating scenario in a panel shop or industrial coating facility. And…